Buy items in our online shop



20 Watt PIR flood light

Lamp Shell Material: High strength aluminum 
Lamp Cover Material: High strengh glasses 
Work Voltage: 110-240V AC 
Beam Angle: 120 degrees 
Lumen Rate: 1600~2000LM 
LED Emitter: 20W PIR high power LED 
Colour Temperature: 6000~6500K(Cold White) 
Power Cable Length: 10~15cm 
Source Life: > 30,000 hours 
Detection Range: 120degrees 
Detection Distance: 4 ~12m (<24 Degrees Celsius) (Adjustable) 
Time Delay: 10 sec to 5min(+/- 5%) (Adjustable) 
Light Control: 3-2000LUX (Adjustable) 
Detection Motion Speed: 0.5~1.5m/s 

£15
Quantity:


50 Watt Standard Floodlight

50w LED bulb is much brighter than 200w traditional halogen bulbs. 
Energy saving and low power consumption. 
Specifications: 
Wattage: 
50 W 
Color: 
Warm White 
Brightness:4800-5200 Lux 
Lens Cover Material:Toughened Glass 
Shell Material:High-strength Aluminum 
Input Voltage:AC85-265V 
Degree Beam Output:120 Degrees

£12.50
Quantity:


Hilka Pro craft 6 piece VDE GS Screwdriver Set

 

This Hilka Pro craft 6 piece VDE GS Screwdriver Set 
is fully Insulated and tested to 10kV (10'000 Volts).
Flat Head: 3" (75mm) x2.5mm , 4" (100mm) x 4.0mm, 5" 
(125mm) x 5.5
Phillips: 3" (75mm) x No 0, 4" (100mm) No1 and 4" 
(100mm) No2

This Hilka Pro craft 6 piece VDE GS Screwdriver Set 
is fully Insulated and tested to 10kV (10'000 Volts).
Flat Head: 3" (75mm) x2.5mm , 4" (100mm) x 4.0mm, 5" 
(125mm) x 5.5Phillips: 3" (75mm) x No 0, 4" (100mm) No1 and 4" 
(100mm) No2

£12.50


Toolzone 3 Pc Professional VDE Plier set.

 

This set of VDE certificated pliers are idel for 
electricians. 
Use them to cut wire or hold wires whilst soldering. 
Each plier has heavy duty soft grip handles with slip 
guards.
The plier heads are made from drop forged Chrome 
vanadium steel and are hardened and tempered for long 
life. 
The laquered finish helps the resistance of 
corrosion. 
The set includes: 
1 x Combination Plier 180mm (7")
1 x Side Cutter 165mm (6.5") 
1 x Long Nose Plier 165mm (6.5")

This set of VDE certificated pliers are idel for 
electricians. Use them to cut wire or hold wires whilst soldering. Each plier has heavy duty soft grip handles with slip 
guards.The plier heads are made from drop forged Chrome 
vanadium steel and are hardened and tempered for long 
life. The laquered finish helps the resistance of 
corrosion. 
The set includes: 1 x Combination Plier 180mm (7")1 x Side Cutter 165mm (6.5") 1 x Long Nose Plier 165mm (6.5")

 

£25


Professional Voltage Sensing Wire Strippers

 

Professional Voltage Sensing Wire Strippers 
Electrical Crimper Cutting Pliers Tool
 
Easily cuts and strips wire.
Narrow, serrated pliers nose to pull and bend wire
Long, curved cutting bolts
Bi-material handles for comfort
Soft shock absorbing grip
Single-handed ergonomic grip for easy operation.
 
Bolt size:
6-32
8-32
10-32
4-40
10-24
5-40

Professional Voltage Sensing Wire Strippers 
Electrical Crimper Cutting Pliers Tool 
Easily cuts and strips wire.
Narrow, serrated pliers nose to pull and bend wire
Long, curved cutting bolts
Bi-material handles for comfort
Soft shock absorbing grip
Single-handed ergonomic grip for easy operation.
 
Bolt size:
6-32
8-32
10-32
4-40
10-24
5-40

 

£5


Crimping Pliers

 

Crimping Pliers
For use on insulated terminals. 200mm
Crimps, strips and cuts wire effortlessly
Crimping tool comfortable finger grip PVC handle
Ideal hand tool for auto-electrical use
Plastic Coated handles provide comfortable hand grip
Wire stripper, Crimper, Wire Cutter

Crimping Pliers
For use on insulated terminals. 200mm
Crimps, strips and cuts wire effortlesslyCrimping tool comfortable finger grip PVC handleIdeal hand tool for auto-electrical usePlastic Coated handles provide comfortable hand gripWire stripper, Crimper, Wire Cutter

 

£5


Audible Socket Tester & Voltage Detector Set

 

Terrific two piece kit!
Check your plug sockets for faults & detect live or 
dead cables with this combined test kit!
Easy to use full instructions included.
TEK7100 Non-Contact Voltage Detector
Clearly detects 100-600V AC without metal contact
Tip flashes red when live voltage is detected
Pocket sized for handy use anywhere
No metalic contact
Suitable for 50Hz/60Hz systems
Built in flashlight
Suitable for socket outlets or against wire 
insulation testing
Specification:-
Standard : CAT III 1000V
Operating Range :  100 - 600V AC
Socket Tester
This socket tester is a safe and easy to use 13A 
socket tester giving LED and buzzer indication of 
socket wiring.
Reliable and easy to use
Clear indication of wiring status
Audible notification of wiring condition
Modern, ergonomic design with unique soft finger grip
Meets BS61010 safety standards
Vivid LEDs indicate a range of wiring conditions

Terrific two piece kit!
Check your plug sockets for faults & detect live or 
dead cables with this combined test kit!
Easy to use full instructions included.
TEK7100 Non-Contact Voltage Detector
Clearly detects 100-600V AC without metal contact
Tip flashes red when live voltage is detected
Pocket sized for handy use anywhere
No metalic contact
Suitable for 50Hz/60Hz systems
Built in flashlight
Suitable for socket outlets or against wire 
insulation testing
Specification:-
Standard : CAT III 1000V
Operating Range :  100 - 600V AC
Socket Tester
This socket tester is a safe and easy to use 13A 
socket tester giving LED and buzzer indication of 
socket wiring.
Reliable and easy to use
Clear indication of wiring status
Audible notification of wiring condition
Modern, ergonomic design with unique soft finger grip
Meets BS61010 safety standards
Vivid LEDs indicate a range of wiring conditions

 

£25


Metrel Handyman HM1AC Voltage Detector

 

Metrel Handyman HM1AC Voltage Detector 
Voltstick/Voltpen
The HM1AC is a unique non-contact voltage detector 
which features a built in LED flashlight. Is simple 
to use and comes complete with a pocket clip & 
batteries.
Detects between 100V and 600V AC
No metallic contact
Rugged double moulded case
Flashing red LED light indication
Convenient size for pocket
Suitable for 50Hz/6-Hz systems
Built in flashlight
Suitable for outlets or against wire insulation 
testing
Standard : CAT III 1000V
Operating Range : Voltfinger : 100 600V AC
Operating Temperature : -10°c 50°c - 0°c -30°x : 95%
Humidity : 30°c - 40°c : 75% - 40°c - 50°c : 45%

Metrel Handyman HM1AC Voltage Detector Voltstick/Voltpen
The HM1AC is a unique non-contact voltage detector 
which features a built in LED flashlight. Is simple 
to use and comes complete with a pocket clip & batteries.

Detects between 100V and 600V AC
No metallic contact
Rugged double moulded case
Flashing red LED light indication
Convenient size for pocket
Suitable for 50Hz/6-Hz systems
Built in flashlight
Suitable for outlets or against wire insulation 
testing

Standard : CAT III 1000V
Operating Range : Voltfinger : 100 600V AC
Operating Temperature : -10°c 50°c - 0°c -30°x : 95%
Humidity : 30°c - 40°c : 75% - 40°c - 50°c : 45%

 

£12.50


Occupancy Sensor - White Ceiling mounted

 

Switch on automatically when someone enters the room 
recessed 
PIR motion occupancy sensor switch with complete 360 
degree detection angle. Enables connected lights to 
switch on automatically light then stays on until the 
person leaves the room and then switches itself off 
when the room is unoccupied, Occupancy sensors 
reflect the latest development in interior lighting 
technology and provide close to zero energy wastage 
in terms of lights being on unnecessarily with 
ability to adjust the timing 2-8 minutes and adjust 
the level of ambient light intensity at which the 
device operatesd 
    Motion Detection Range 6m
    Time Setting:2- 8 minutes - Maximum Load - 1200w 
Incandescent - 300w Fluorescent
    Motion Detection Angle: 360° - Installing Height 
2.2m -4m
    The ability to adjust the level of ambient light 
intensity at which the device operates
    Diameter 74mm. Cut Out Hole Size: 60mm
Not Suitable for use with Extractor

Switch on automatically when someone enters the room 
recessed 
PIR motion occupancy sensor switch with complete 360 
degree detection angle. Enables connected lights to 
switch on automatically light then stays on until the 
person leaves the room and then switches itself off 
when the room is unoccupied, Occupancy sensors 
reflect the latest development in interior lighting 
technology and provide close to zero energy wastage 
in terms of lights being on unnecessarily with 
ability to adjust the timing 2-8 minutes and adjust 
the level of ambient light intensity at which the 
device operatesd 
    Motion Detection Range 6m    Time Setting:2- 8 minutes - Maximum Load - 1200w 
Incandescent - 300w Fluorescent    Motion Detection Angle: 360° - Installing Height 
2.2m -4m    The ability to adjust the level of ambient light 
intensity at which the device operates    Diameter 74mm. Cut Out Hole Size: 60mm
Not Suitable for use with Extractor

£10
Quantity:


Occupancy sensor - Chrome Ceiling mounted

 

CHROME 360 Degree Recessed PIR Ceiling Occupancy 
Motion Sensor Detector Light
Detection Range: 360 degree
Power Source: AC 220-240V/AC 
Power Frequency: 50/60Hz
Rated Load: Max.1200W (220-240V/AC) 
Detection Distance: max.6m (<24℃) 
Time Delay:10sec to 7min(adjustable)
Ambient Light :3-2000LUX(adjustable)
Detection Motion Speed: 0.6-1.5m/s
Installation Height: 2.2-4m
Size of PIR: 55mm from the ceiling and cut out 65mm.
Technical parameters
220-240V supplyRated frequency 50Hzfor building in 
vertical surface or from the bottom of solid 
surfaceclamp 3 x 0,75 mm2protection against solid 
objects over 12mmapplicable indoorsII protection 
classpermitted mounting on flamable regular surface50 
pcs per inner boxweight 100gconformity with European 
standards

CHROME 360 Degree Recessed PIR Ceiling Occupancy 
Motion Sensor Detector Light
Detection Range: 360 degreePower Source: AC 220-240V/AC Power Frequency: 50/60HzRated Load: Max.1200W (220-240V/AC) Detection Distance: max.6m (<24℃) Time Delay:10sec to 7min(adjustable)Ambient Light :3-2000LUX(adjustable)Detection Motion Speed: 0.6-1.5m/sInstallation Height: 2.2-4mSize of PIR: 55mm from the ceiling and cut out 65mm.Technical parameters
220-240V supplyRated frequency 50Hzfor building in 
vertical surface or from the bottom of solid 
surfaceclamp 3 x 0,75 mm2protection against solid 
objects over 12mmapplicable indoorsII protection 
classpermitted mounting on flamable regular surface50 
pcs per inner boxweight 100gconformity with European 
standards

£15
Quantity:


Catenary Wire Kit 30mtr 3mm

 

Catenary Wire Kit 30mtr 3mm

Kit Consists Of 30mtr Of 3mm Catenary Wire
1 - Turnbuckle
2 - Eyelets 
4 - Wire Rope Grips 
1 - Hook Plate 
1 - Ring Plate
1 - Eye Bolt

 

 

£20

Digital Multimeter

 This Multitester can be used for AC/DC voltage test, DC/AC current test, electric current resistance, hfe (DC amplification) test, Temperature test, Frequency test, two-electrode valve test, NPN PNP transistor test, etc. You can use the Multimeter in more places, such as factory, school lab, home hobby, machine repairing, etc.
Digital LCD multimeter, can be used for Ohm AC/DC volt test and overhaul all kinds of circuit boards Auto polarity display/Diode test/Transistor P-N junction test/Transistor HFE test Auto turn off & Data hold function; Low battery voltage indication Continuity test with buzzer sound in circuit Overload protection on all ranges.

Display: Blue Backlight LCD, 1999 counts, updates 2-3/sec

Measuring method: Dual-slope integration A/D Converter

Operating Environment: 0 to 40 °C

Power: 9V Battery, NEDA 1604 or 6F22 Type

Fuse Protection: 200mA/250V

Size: 138mm x 69mm x 31mm

Weight: Approx. 280g

Measurement Range 200VmV-600V±0.5% of rdg ± 2 digits

Overload Protection: 250V rms


£10

Make payments with PayPal - it's fast, free and secure!